Manufacturer
 | Knauf GesmbH A-8940 Weißenbach / Liezen Austria |
| Product groups: | Gypsum plasterboards | ||
| Product photos: | 
| ||
| Reference value: | Gypsum plasterboard (700 kg/m³) | ||
 |
2. 1. 3. Limit for the plastic content of mineral products |
|
2. 2. 5. Ban of alkylphenol ethoxylates (APEO) |
 |
3. 3. 4. Additional criterion: Use of FGD gypsum |
|
The criteria is relevant and the product supports the fulfillment of the criterion. |
|
The criteria is relevant and the product does not support the fulfillment of the criterion or there are no validation documents available. |
| thickness: | 0,60 cm 0,95 cm 1,25 cm 1,50 cm 1,80 cm | ||
| λ thermal conductivity: | 0,25 | W/(m·K) | |
| ρ density: | 680 | kg/m³ | |
| c specific heat capacity: | 960 | J/(kg·K) | |
| μ Vapour diffusion resistance factor: | 10 |
| Flammability class: | A2 | ||
| Smoke emission: | s1 = No/minimal smoke emission | ||
| Flaming droplets: | d0 = No falling / dripping | ||
| Panel type (gypsum wallboard): | Type A standard gypsum board | ||
| Installation (description): | not specified | ||
| A1-A3 Product stage EI disposal indicator |
Wert | Unit |
| Core environmental impact indicators | ||
| GWP-fossil Global warming potential - fossil | 0,231 | kg CO2 Äq./kg |
| GWP-biogenic Global warming potential - biogenic | -0,0660 | kg CO2 Äq./kg |
| GWP-total Global warming potential - total | 0,165 | kg CO2 Äq./kg |
| ODP Depletion potential of the stratospheric ozone layer | 3,01·10-8 | kg CFC-11 eq./kg |
| AP Acidification potential | 0,000744 | kg SO2 Äq./kg |
| EP Eutrophication potential | 0,000280 | kg PO43- eq./kg |
| POCP Photochemical Ozone Creation Potential | 7,95·10-5 | kg C2H4 eq./kg |
| ADPE Abiotic depletion potential for non fossil resources | 4,18·10-7 | kg Sb eq./kg |
| ADPF Abiotic depletion potential for fossil resources | 3,49 | MJ/kg |
| Indicators describing resource use | ||
| PERE Primary energy renewable - energy resources | 0,251 | MJ/kg |
| PERM Primary energy renewable - material | 0,519 | MJ/kg |
| PERT Primary energy renewable - total | 0,769 | MJ/kg |
| PENRE Primary energy non-renewable - energy resources | 3,73 | MJ/kg |
| PENRM Primary energy non-renewable - material | 0,00 | MJ/kg |
| PENRT Primary energy non-renewable - total | 3,73 | MJ/kg |
| SM Use of secondary material | 0,0292 | kg/kg |
| RSF Use of renewable secondary fuels | 0,00 | MJ/kg |
| NRSF Use of non renewable secondary fuels | 0,00 | MJ/kg |
| Environmental information describing waste categories | ||
| HWD Hazardous waste disposed | 4,15·10-6 | kg/kg |
| NHWD Non hazardous waste dispose | 0,0561 | kg/kg |
| RWD Radioactive waste disposed | 2,12·10-5 | kg/kg |
| Environmental information describing output flows | ||
| CRU Components for re-use | 0,00 | kg/kg |
| MFR Materials for recycling | 0,00 | kg/kg |
| MER Materials for energy recovery | 0,00 | kg/kg |
| EEE Exported electrical energy | 0,00 | MJ/kg |
| EET Exported thermal energy | 0,00 | MJ/kg |
| Environmental Product Declaration (EPD) - ecoinvent A1: | valid until Oct 10, 2024 | ||
| SVHC (Substances of Very High Concern): | Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste | ||
| Halogen-organic compounds: | not specified | w% | |
| Country of origin of raw materials (text): | not specified | ||
| CE marking: | yes | ||
| CE Declaration of Performance: | issued on June 10, 2013 | ||
 PDF (180 KB) valid until January 2027 Certificate no.: 45-3887 |
| Technical data sheet: | issued on Feb 1, 2015 | ||
 | A. Pümpel GmbH & Co. KG. A-6800 Feldkirch Austria |
 | MBA - DÄMMSTOFFE GmbH A-6850 Dornbirn Austria |
 | Tischler Rohstoff e.Gen. A-6845 Hohenems Austria |
 | Tschabrun Hermann GmbH A-6830 Rankweil Austria |
| Listed since: | Dec 11, 2009 | ||
| Amended: | Nov 15, 2022 | ||
| baubook product index: | 8039 aa | ||
|
