K1multiplan (3-S Massivholzplatte) Fichte
link to this page:
https://www.baubook.at/m/PHP/Info.php?SI=2142705276&SW=16&lng=2

Manufacturer
Mayr-Melnhof Holz Holding AG
A-8700 Leoben
Austria
 
Description
Product groups: Solid wood panels
Product photos:
Materials used: Nadelholz Fichte (picea abies),
Klebstoff MUF (Melaminharz)
Renewable raw materials: 100w%
Reference value: Solid wood panels (3-layer, 5-layer), spruce/fir (475 kg/m³)
 
Criteria for certification, tendering and subsidies
List of Criteria 2020
applicationcriteria
AB
3. 3. 1. Additional criterion: Prohibition of non-sustainable tropical woods
3. 3. 2. Additional criterion: Prohibition of non-sustainable non-tropical woods
3. 3. 7. Minimum share of wood from sustainable forestry
5. 1. 1. VOC and SVOC limits for wood-based products
5. 1. 2. Formaldehyde limit for wood-based products
A: Wood and wood-based materials with indoor air relevance
Wood and wood-based materials installed on the room side of the airtight layer of the building.
B: Wood and wood-based materials without interior air relevance
Wood and wood-based materials that are not installed on the room side of the airtightness layer of the building.

The criteria is relevant and the product supports the fulfillment of the criterion.
The criteria is not relevant for the application.
if an application is displayed in green, all relevant criteria of this application are met.
If at least one of the relevant criteria for an application is not met, the application is displayed in red.
 
Technical characteristics
Dimensions
thickness: 2,0 cm
2,6 cm
3,5 cm
4,0 cm
4,5 cm
5,0 cm
5,5 cm
6,0 cm
6,5 cm
7,0 cm
7,5 cm
Dimensions (description): Produktionmaß 6020 x 2015mm
Standardformat 6000 x 2000mm

Sonderformate für Holzart Fichte:
• Breite 150 cm Länge 500 cm / 550 cm / 600 cm
• Breite 175 cm Länge 500 cm / 550 cm / 600 cm
• Breite 200 cm Länge 450 cm / 500 cm / 550 cm

Die Verrechnung erfolgt mit einem Sonderzuschlag und auf das nächst höhere Abmaß, z.B. Bestellmaß 420 x 130 cm = Verrechnungsmaß 500 x 150 cm.

K1multiplan mit Decklage Lärche werden nur in den Formaten 600 x 200 cm und 500 x 200 cm hergestellt,
 
Physical parameters
Serviceability
Flammability class:
G
Smoke emission:
s2 = Limited smoke emission
Flaming droplets:
d0 = No falling / dripping
Panel type (solid wood board):
SWP/3 Outdoor area load-bearing
 
Processing properties
Installation (description): not specified
 
Life Cycle Assessment (LCA)
Background database Ecoinvent A1
A1-A3 Product stage
EI disposal indicator
reference Unit
Core environmental impact indicators
GWP-fossil Global warming potential - fossil 0,510 kg CO2 Äq./kg
GWP-biogenic Global warming potential - biogenic -1,52 kg CO2 Äq./kg
GWP-total Global warming potential - total -1,01 kg CO2 Äq./kg
ODP Depletion potential of the stratospheric ozone layer 4,41·10-8 kg CFC-11 eq./kg
AP Acidification potential 0,00288 kg SO2 Äq./kg
EP Eutrophication potential 0,00138 kg PO43- eq./kg
POCP Photochemical Ozone Creation Potential 0,00104 kg C2H4 eq./kg
Indicators describing resource use
PERE Primary energy renewable - energy resources 0,633 MJ/kg
PERM Primary energy renewable - material 17,1 MJ/kg
PERT Primary energy renewable - total 17,7 MJ/kg
PENRE Primary energy non-renewable - energy resources 8,83 MJ/kg
PENRM Primary energy non-renewable - material 0,374 MJ/kg
PENRT Primary energy non-renewable - total 9,20 MJ/kg
Quelle: IBO benchmarks 2020, ab 17.2.2023
 
 
Ecological characteristics
Ingredients
SVHC (Substances of Very High Concern): Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste
 
Production of raw materials
Nachhaltige Holzgewinnung:
  • The declared product line does not contain any tropical woods.
  • All primary woods used come exclusively from Austria, Germany or Switzerland (D-A-CH). The manufacturer submits a confirmation of origin for this.
  • All primary woods used come exclusively from EU Europe or Switzerland. The manufacturer submits a confirmation of origin for this.
Country of origin of raw materials (text): not specified
 
Service area
CE marking
CE marking: yes
CE Certificate of conformity:
issued by: Otto-Graf-Institut Universität Stuttgart
CE Declaration of Performance:
issued on Aug 26, 2019
 
Ecolabels
FSC
PDF (921 KB)
valid until March 2025
PEFC
PDF (672 KB)
valid until June 2027
Holz von Hier
PDF (756 KB)
valid until May 2025
 
Download
Test certificate in accordance with EN ISO 16000:
available
issued on July 8, 2020
issued by: EPH Dresden
Documents:
 
baubook declaration
Listed since: Aug 24, 2010
Amended: Mar 15, 2023
baubook product index: 8760 aa
 
baubook green procurement
Harmonised “EcoBuildingCriteria” provided by “ÖkoKauf Wien” and “service package sustainable construction in Vorarlberg”