CWS WERTLACK® Haftgrund Aqua
link to this page:
https://www.baubook.at/m/PHP/Info.php?SI=2142710636&SW=16&lng=2

Manufacturer
Dörken Coatings GmbH & Co. KG
D-58313 Herdecke
Germany
 
Description
Product groups: Primers for non-mineral substrates (external), Primers for non-mineral substrates (internal)
Product photos:
Materials used: Acrylat-Copolymer, Polyurethan, ggf. Titandioxid, ggf. organische und anorganische Buntpigmente, ggf. Ruß, Chlorite, Talkum, Dolomit, Wasser, Propylenglykol, Butyldiglykol, Methoxypropoxypropanol, Polyethylenwachs, Wirkstoffe zum Lagerschutz
Mineral raw materials: 15w%
Fossil raw materials: 23w%
Renewable raw materials: 38w%
 
Criteria for certification, tendering and subsidies
List of Criteria 2020
Primers for non-mineral substrates (external)
applicationcriteria
AB
2. 2. 1. Limits for CMR substances
2. 2. 4. Limits for substances hazardous to the aquatic environment
2. 2. 5. Ban of alkylphenol ethoxylates (APEO)
2. 2. 11. Ban of SVHC
2. 2. 12. Ban of acutely toxic substances
2. 2. 16. Ban of volatile aromatic hydrocarbons
2. 3. 3. Limits for heavy metals
2. 4. 4. Limit for organohalogen compounds in coatings
2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
2. 5. 9. VOC limits for exterior coatings
2. 6. 1. Limits for biocides
2. 6. 2. Limit for free formaldehyde
2. 6. 8. Limitation of wood preservatives
2. 9. 1. Additional criterion: Avoidance of reactive coatings
2. 9. 3. Ban of acid-cured coatings
3. 2. 2. Additional criterion: Products made of natural materials
A: eco class A
The use of biocides is not required in outdoor use.
B: eco class B
In exceptional cases, the use of wood preservatives is indispensable. This must be explicitly requested in the call for tenders.
Primers for non-mineral substrates (internal)
2. 2. 1. Limits for CMR substances
2. 2. 4. Limits for substances hazardous to the aquatic environment
2. 2. 5. Ban of alkylphenol ethoxylates (APEO)
2. 2. 10. Ban of substances that are dangerous to health
2. 2. 11. Ban of SVHC
2. 2. 12. Ban of acutely toxic substances
2. 2. 15. Additional criterion: Prohibition of zirconium salt of 2-ethylhexanoic acid
2. 2. 16. Ban of volatile aromatic hydrocarbons
2. 3. 3. Limits for heavy metals
2. 4. 4. Limit for organohalogen compounds in coatings
2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
2. 5. 4. VOC and SVOC limits for interior coatings
2. 6. 1. Limits for biocides
2. 6. 2. Limit for free formaldehyde
2. 9. 1. Additional criterion: Avoidance of reactive coatings
2. 9. 3. Ban of acid-cured coatings
3. 2. 2. Additional criterion: Products made of natural materials

The criteria is relevant and the product supports the fulfillment of the criterion.
The criteria is relevant and the product does not support the fulfillment of the criterion or there are no validation documents available.
The criteria is not relevant for the application.
if an application is displayed in green, all relevant criteria of this application are met.
If at least one of the relevant criteria for an application is not met, the application is displayed in red.
 
Technical characteristics
Dimensions
thickness: minimum: 0,013 cm
maximum: any
 
Physical parameters
ρ density: not specifiedkg/m³
c specific heat capacity: not specifiedJ/(kg·K)
 
Physiochemical properties
pH value: ranging from 8 up to 9
 
Processing properties
Installation (description): not specified
Order type:
  • Airless spraying
  • Rolls
  • Inject
  • Paint
Processing temperature, at least: 8°C
Can be overpainted after: 14hour(s)
Consumption per procedure (l/m²): 0,12l/m²
Consumption per procedure (kg/m²): 0,14kg/m²
Drying time: ranging from 8 up to 14hour(s)

Additional products
 
Life Cycle Assessment (LCA)
Other Environmental product declarations
Environmental Product Declaration (EPD) - other:
valid until July 10, 2024
 
Ecological characteristics
Ingredients
SVHC (Substances of Very High Concern): Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste mit mehr als 0,1 Gew.-% pro Einzelstoff.
VOC (g/l): 50g/l
VOC explanation:
Maximum value
Softener:
Softener-free
Halogen-organic compounds: 0w%
 
Service area
CE marking
CE marking: not specified
 
GHS hazard statement, warnings, hazard classes
Water pollution class:
2
P phrases: P280, P501
 
GISCODE
GISBAU Product code for Concrete after-treatment:
BSW30 Coating materials, water-based, solvent-based
GISBAU Product code for paints and varnishes:
M-GP01 Primers, pigmented, water-dilutable
 
Download
Technical data sheet:
issued on Aug 1, 2020
Safety data sheet:
issued on July 21, 2021
Sustainability data sheet:
issued on Apr 8, 2021
 
Retailer
Sefra Farben-und Tapetenvertrieb GmbH
A-1050 Wien
Austria
 
baubook declaration
Listed since: Feb 24, 2012
Amended: Jan 3, 2022
baubook product index: 1495 ay
 
baubook green procurement
Harmonised “EcoBuildingCriteria” provided by “ÖkoKauf Wien” and “service package sustainable construction in Vorarlberg”