best wood TOP 160

best wood SCHNEIDER GmbH
D-88436 Eberhardzell
Germany

Product groups:	Wood-fibre insulation boards
Product photos:
Renewable raw materials:	94	w%
Mineral raw materials:	0	w%
Fossil raw materials:	0	w%
Recycling materials:	6	w%
Bitumen:	0	w%
Reference value:	Wood fibre WF-WD (180 kg/m³)

List of Criteria 2020

application		criteria
A	B
		2. 1. 4. Limit for plastic content in insulating materials and foils made of paper
		2. 2. 2. Limits for CMR substances in insulation materials
		2. 2. 12. Ban of acutely toxic substances
		2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
		3. 3. 1. Additional criterion: Prohibition of non-sustainable tropical woods
		3. 3. 2. Additional criterion: Prohibition of non-sustainable non-tropical woods
		3. 3. 7. Minimum share of wood from sustainable forestry
		5. 1. 7. Limits for VOC and SVOC emissions from wood fibre insulation materials

A: Insulation materials with indoor air relevance
Insulation materials installed on the room side of the airtightness layer of the building.

B: Insulation materials without indoor air relevance
Insulation materials that are not installed on the room side of the building's airtightness layer.

	The criteria is relevant and the product supports the fulfillment of the criterion.
	The criteria is not relevant for the application.

	if an application is displayed in green, all relevant criteria of this application are met.
	If at least one of the relevant criteria for an application is not met, the application is displayed in red.

Types of application according to ÖNORM B 6000 (WF):

WF-WD Wood-fibre insulation, compression-resistant, stressed in tension perpendicular to the panel surface, e.g. for heat insulation of roofs, back-ventilated facades and floors

Dimensions

thickness:	6 cm 8 cm 10 cm 12 cm
Dimensions (description):	572 mm x 2000 mm / 572 mm x 2500 mm

Physical parameters

λ_r thermal conductivity rated value_AUT:	0,051	W/(m·K)	Richtwert
λ_{acc. to DIN 4108-4:}	0,043	W/(m·K)
ρ density:	160	kg/m³
c specific heat capacity:	2100	J/(kg·K)
μ Vapour diffusion resistance factor:	3

Serviceability

Flammability class:

Installation (description):

not specified

Background database Ecoinvent A1

A1-A3 Product stage EI disposal indicator	reference	Unit
Core environmental impact indicators
GWP-fossil Global warming potential - fossil	0,879	kg CO₂ Äq./kg
GWP-biogenic Global warming potential - biogenic	-1,62	kg CO₂ Äq./kg
GWP-total Global warming potential - total	-0,741	kg CO₂ Äq./kg
ODP Depletion potential of the stratospheric ozone layer	6,73·10^-8	kg CFC-11 eq./kg
AP Acidification potential	0,00341	kg SO₂ Äq./kg
EP Eutrophication potential	0,00157	kg PO₄^3- eq./kg
POCP Photochemical Ozone Creation Potential	0,000483	kg C₂H₄ eq./kg
Indicators describing resource use
PERE Primary energy renewable - energy resources	1,85	MJ/kg
PERM Primary energy renewable - material	16,4	MJ/kg
PERT Primary energy renewable - total	18,2	MJ/kg
PENRE Primary energy non-renewable - energy resources	13,2	MJ/kg
PENRM Primary energy non-renewable - material	1,55	MJ/kg
PENRT Primary energy non-renewable - total	14,8	MJ/kg

Quelle: IBO benchmarks 2020, ab 17.2.2023

Background database GaBi A2

Show all life phases

A1-A3 Product stage EI disposal indicator	Wert	Unit
Core environmental impact indicators
GWP-fossil Global warming potential - fossil fuels	0,490	kg CO₂ eq./kg
GWP-biogenic Global warming potential - biogenic	-1,58	kg CO₂ eq./kg
GWP-luluc Global warming potential - land use and land use change	0,00147	kg CO₂ eq./kg
GWP-total Global warming potential - total	-1,08	kg CO₂ eq./kg
ODP Depletion potential of the stratospheric ozone layer	3,58·10^-10	kg CFC-11 eq./kg
AP Acidifcation potential - Accumulated Exceedance	0,00152	mol H⁺ eq./kg
EP-freshwater Eutrophication potential - freshwater	8,25·10^-6	kg P eq./kg
EP-marine Eutrophication potential - marine	0,000543	kg N eq./kg
EP-terrestrial Eutrophication potential - terrestrial	0,00511	mol N eq./kg
POCP Photochemical Ozone Creation Potential	0,00139	kg NMVOC eq./kg
ADPE Abiotic depletion potential - non-fossil resources	1,91·10^-7	kg Sb eq./kg
ADPF Abiotic depletion potential - fossil resources	10,8	MJ/kg
WDP Water (user) deprivation potential	0,0408	m³ world eq. deprived/kg
Indicators describing resource use
PERE Primary energy renewable - energy resources	8,06	MJ/kg
PERM Primary energy renewable - material	16,4	MJ/kg
PERT Primary energy renewable - total	24,5	MJ/kg
PENRE Primary energy non-renewable - energy resources	9,13	MJ/kg
PENRM Primary energy non-renewable - material	1,65	MJ/kg
PENRT Primary energy non-renewable - total	10,8	MJ/kg
SM Use of secondary material	0,00	kg/kg
RSF Use of renewable secondary fuels	0,00	MJ/kg
NRSF Use of non renewable secondary fuels	0,00	MJ/kg
FW Use of net fresh water	0,00399	m³/kg
Environmental information describing waste categories
HWD Hazardous waste disposed	2,39·10^-8	kg/kg
NHWD Non hazardous waste dispose	0,0101	kg/kg
RWD Radioactive waste disposed	0,000283	kg/kg
Environmental information describing output flows
CRU Components for re-use	0,00	kg/kg
MFR Materials for recycling	0,00	kg/kg
MER Materials for energy recovery	0,00	kg/kg
EEE Exported electrical energy	0,00	MJ/kg
EET Exported thermal energy	0,00	MJ/kg
Additional environmental impact indicators
PM Potential incidence of disease due to PM emissions	2,98·10^-8	Disease incidence/kg
IRP Potential Human exposure efficiency relative to U235	0,0259	kgBq U235 eq./kg
ETP-fw Potential Comparative Toxic Unit for ecosystems	4,26	CTUe/kg
HTP-c Potential Comparative Toxic Unit for humans - cancer effects	1,75·10^-10	CTUh/kg
HTP-nc Potential Comparative Toxic Unit for humans - non-cancer effects	1,08·10^-8	CTUh/kg
SQP Potential Soil quality index	38,9	1/kg

Environmental Product Declaration (EPD) - Gabi A2:

Umwelt-Produktdeklaration (1,35 MB)

valid until Sept 19, 2028

Ingredients

Halogen-organic compounds:

Production of raw materials

Nachhaltige Holzgewinnung:	The declared product line does not contain any tropical woods. All primary woods used come exclusively from Austria, Germany or Switzerland (D-A-CH). The manufacturer submits a confirmation of origin for this. All primary woods used come exclusively from EU Europe or Switzerland. The manufacturer submits a confirmation of origin for this.
Country of origin of raw materials (text):	not specified

CE marking

CE marking:	yes
CE Declaration of Performance:	TOP_160_Leistungserklaerung_de.pdf (189 KB) issued on May 17, 2023 valid until Jan 1, 2026

Ecolabels

certificate
valid until Sept 30, 2024
Certificate no.: 0104-1112-114-2
Status: zertifiziert
Issuance Guidelines: 0104

PDF (1,94 MB)

valid until March 2025

Download

Technical data sheet:	technisches_datenblatt_top_160.pdf (336 KB) issued on Jan 1, 2022
Safety data sheet:	not available

A. Pümpel GmbH & Co. KG.
A-6800 Feldkirch
Austria

Listed since:	July 10, 2013
Amended:	Jan 31, 2024
baubook product index:	8839 ai
Current:	recently updated