Pittsburgh Corning Ges.m.b.H. A-4020 Linz Austria |
Product groups: | Foam glass insulation boards | ||
Description of the area of application: | - Flat roof - Facade, plinth - Interior insulation (wall, floor, ceiling) | ||
Product description: | Our high-quality insulation boards made of foam glass can be used in a variety of ways. Thanks to the compact dimensions of 60x45 cm, they are easy to process and can also be laid without any problems on small surfaces and in confined spaces. FOAMGLAS® insulation is made from high-quality recycled glass** and natural raw materials. recycled glass and natural raw materials that occur in nature in almost (sand, dolomite, lime ...). FOAMGLAS® is inorganic, free of ozone-depleting propellant gases, flame retardants or binders. Without VOC or other volatile substances. | ||
Reference value: | Foam glass slabs CG-D (100 kg/m³) |
The criteria is relevant and the product supports the fulfillment of the criterion. | |
The criteria is not relevant for the application. | |
if an application is displayed in green, all relevant criteria of this application are met. | |
If at least one of the relevant criteria for an application is not met, the application is displayed in red. |
Types of application according to ÖNORM B 6000 (CG): | CG-D Foam glass (Cellular glass), compression-resistant, for heat insulation of walls, single- and double-sheet roofs as well as layers distributing the load, e.g. for terraces, parking levels |
Format l x w: | 600 mm x 450 mm | ||
thickness: | 5 cm 6 cm 7 cm 8 cm 9 cm 10 cm 11 cm 12 cm 13 cm 14 cm 15 cm 16 cm 17 cm 18 cm 19 cm 20 cm |
λr thermal conductivity rated valueAUT: | 0,036 | W/(m·K) | |
ρ density: | 100 | kg/m³ | Richtwert |
c specific heat capacity: | 1000 | J/(kg·K) | Richtwert |
μ Vapour diffusion resistance factor: | 40000 |
Flammability class: | A1 | ||
Smoke emission: | s1 = No/minimal smoke emission | ||
Flaming droplets: | d0 = No falling / dripping |
Installation (description): | not specified |
A1-A3 Product stage EI disposal indicator |
reference | Unit |
Core environmental impact indicators | ||
GWP-fossil Global warming potential - fossil | 2,42 | kg CO2 Äq./kg |
GWP-biogenic Global warming potential - biogenic | 0,00 | kg CO2 Äq./kg |
GWP-total Global warming potential - total | 2,42 | kg CO2 Äq./kg |
ODP Depletion potential of the stratospheric ozone layer | 2,16·10-7 | kg CFC-11 eq./kg |
AP Acidification potential | 0,00859 | kg SO2 Äq./kg |
EP Eutrophication potential | 0,00482 | kg PO43- eq./kg |
POCP Photochemical Ozone Creation Potential | 0,000637 | kg C2H4 eq./kg |
Indicators describing resource use | ||
PERE Primary energy renewable - energy resources | 1,86 | MJ/kg |
PERM Primary energy renewable - material | 0,00 | MJ/kg |
PERT Primary energy renewable - total | 1,86 | MJ/kg |
PENRE Primary energy non-renewable - energy resources | 40,9 | MJ/kg |
PENRM Primary energy non-renewable - material | 0,00 | MJ/kg |
PENRT Primary energy non-renewable - total | 40,9 | MJ/kg |
A1-A3 Product stage EI disposal indicator |
Wert | Unit |
Core environmental impact indicators | ||
GWP-fossil Global warming potential - fossil fuels | 1,50 | kg CO2 eq./kg |
GWP-biogenic Global warming potential - biogenic | -0,0472 | kg CO2 eq./kg |
GWP-luluc Global warming potential - land use and land use change | 0,000848 | kg CO2 eq./kg |
GWP-total Global warming potential - total | 1,45 | kg CO2 eq./kg |
ODP Depletion potential of the stratospheric ozone layer | 0,00 | kg CFC-11 eq./kg |
AP Acidifcation potential - Accumulated Exceedance | 0,00477 | mol H+ eq./kg |
EP-freshwater Eutrophication potential - freshwater | 2,73·10-5 | kg P eq./kg |
EP-marine Eutrophication potential - marine | 0,00179 | kg N eq./kg |
EP-terrestrial Eutrophication potential - terrestrial | 0,0189 | mol N eq./kg |
POCP Photochemical Ozone Creation Potential | 0,00413 | kg NMVOC eq./kg |
ADPE Abiotic depletion potential - non-fossil resources | 2,38·10-7 | kg Sb eq./kg |
ADPF Abiotic depletion potential - fossil resources | 23,0 | MJ/kg |
WDP Water (user) deprivation potential | 0,123 | m³ world eq. deprived/kg |
Indicators describing resource use | ||
PERE Primary energy renewable - energy resources | 13,3 | MJ/kg |
PERM Primary energy renewable - material | 0,600 | MJ/kg |
PERT Primary energy renewable - total | 13,9 | MJ/kg |
PENRE Primary energy non-renewable - energy resources | 22,1 | MJ/kg |
PENRM Primary energy non-renewable - material | 0,890 | MJ/kg |
PENRT Primary energy non-renewable - total | 23,0 | MJ/kg |
SM Use of secondary material | 0,560 | kg/kg |
RSF Use of renewable secondary fuels | 0,00 | MJ/kg |
NRSF Use of non renewable secondary fuels | 0,00 | MJ/kg |
FW Use of net fresh water | 0,0394 | m³/kg |
Environmental information describing waste categories | ||
HWD Hazardous waste disposed | 4,96·10-8 | kg/kg |
NHWD Non hazardous waste dispose | 0,0412 | kg/kg |
RWD Radioactive waste disposed | 0,000109 | kg/kg |
Environmental information describing output flows | ||
CRU Components for re-use | 0,00 | kg/kg |
MFR Materials for recycling | 0,00 | kg/kg |
MER Materials for energy recovery | 0,00 | kg/kg |
EEE Exported electrical energy | 0,00 | MJ/kg |
EET Exported thermal energy | 0,00 | MJ/kg |
Additional environmental impact indicators | ||
PM Potential incidence of disease due to PM emissions | 4,81·10-8 | Disease incidence/kg |
IRP Potential Human exposure efficiency relative to U235 | 0,0151 | kgBq U235 eq./kg |
ETP-fw Potential Comparative Toxic Unit for ecosystems | 37,8 | CTUe/kg |
HTP-c Potential Comparative Toxic Unit for humans - cancer effects | 8,62·10-10 | CTUh/kg |
HTP-nc Potential Comparative Toxic Unit for humans - non-cancer effects | 3,63·10-8 | CTUh/kg |
SQP Potential Soil quality index | 17,1 | 1/kg |
Environmental Product Declaration (EPD) - Gabi A2: | EPD-PCE-20200300-IBB2-EN (646 KB) valid until Mar 14, 2026 |
SVHC (Substances of Very High Concern): | Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste | ||
Halogen-organic compounds: | 0 | w% |
Country of origin of raw materials (text): | not specified |
CE marking: | yes | ||
CE Certificate of conformity: |
| ||
CE Declaration of Performance: | DOP_CE_slabs_T3_01_01_2022_DE.pdf (221 KB) issued on Jan 1, 2022 |
certificate valid until Dec 31, 2028 Certificate no.: 0406-101-9001 Status: zertifiziert bis zum Abschluss der laufenden Prüfung Issuance Guidelines: 0406 | certificate valid until Mar 31, 2024 Certificate no.: 0406-1101-101-1 Status: zertifiziert bis zum Abschluss der laufenden Prüfung Issuance Guidelines: 0406 | certificate valid until Dec 31, 2028 Certificate no.: 0406-2012-101-2 Status: zertifiziert Issuance Guidelines: 0406 |
Safety data sheet: | not available |
A. Pümpel GmbH & Co. KG. A-6800 Feldkirch Austria |
Listed since: | Jan 15, 2015 | ||
Amended: | Jan 26, 2023 | ||
baubook product index: | 9461 al |
|