Manufacturer
 | PCI Augsburg GmbH A-1200 Wien Austria |
| Product groups: | adhesive and filling mortar (powdery bagged goods), Adhesives for mineral floor coverings | ||
| Materials used: | verschiedene Zemente, Füllstoffe wie Quarzsand und Kalksteinmehl, Additive wie Abbinderegler und Verdicker, Dispersionspulver | ||
| Renewable raw materials: | 0 | w% | |
| Mineral raw materials: | 95 | w% | |
| Fossil raw materials: | 5 | w% | |
| Reference value: | Mineral adhesive | ||
 |
The criteria is relevant and the product supports the fulfillment of the criterion. |
| thickness: | minimum: 0,1 cm maximum: 1,0 cm | ||
| λ thermal conductivity: | 1 | W/(m·K) | Richtwert |
| ρ density: | 1200 | kg/m³ | |
| c specific heat capacity: | not specified | J/(kg·K) |
| pH value: | 12,5 |
| Installation (description): | not specified | ||
| A1-A3 Product stage EI disposal indicator |
reference | Unit |
| Core environmental impact indicators | ||
| GWP-fossil Global warming potential - fossil | 0,335 | kg CO2 Äq./kg |
| GWP-biogenic Global warming potential - biogenic | 0,00 | kg CO2 Äq./kg |
| GWP-total Global warming potential - total | 0,335 | kg CO2 Äq./kg |
| ODP Depletion potential of the stratospheric ozone layer | 1,99·10-8 | kg CFC-11 eq./kg |
| AP Acidification potential | 0,000936 | kg SO2 Äq./kg |
| EP Eutrophication potential | 0,000559 | kg PO43- eq./kg |
| POCP Photochemical Ozone Creation Potential | 0,000116 | kg C2H4 eq./kg |
| Indicators describing resource use | ||
| PERE Primary energy renewable - energy resources | 0,210 | MJ/kg |
| PERM Primary energy renewable - material | 0,00 | MJ/kg |
| PERT Primary energy renewable - total | 0,210 | MJ/kg |
| PENRE Primary energy non-renewable - energy resources | 4,18 | MJ/kg |
| PENRM Primary energy non-renewable - material | 0,00 | MJ/kg |
| PENRT Primary energy non-renewable - total | 4,18 | MJ/kg |
| SVHC (Substances of Very High Concern): | Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste mit mehr als 0,1 Gew.-% pro Einzelstoff. | ||
| VOC (g/l): | 1 | g/l | |
| VOC explanation: | Maximum value | ||
| Halogen-organic compounds: | 0 | w% | |
| CE marking: | not specified | ||
| CE Declaration of Performance: | LE_Flexmoertel_S1.pdf (126 KB) issued on Apr 22, 2015 | ||
 PDF (278 KB) issued on July 8, 2019 valid until July 2024 |
| Water pollution class: | 1 | ||
| H phrases: | H315, H318, H335 | ||
| P phrases: | P102, P280, P261, P264, P305, P351, P338, P315, P304, P340, P302, P352, P332, P313, P362 | ||
| GISCODE for cement-containing products: | ZP1 Products containing cement, low in chromates | ||
| Technical data sheet: | TM_Flexmoertel_S1.pdf (528 KB) issued on May 1, 2018 | ||
| Safety data sheet: | Flexmoertel_S1.pdf (122 KB) issued on Aug 29, 2016 | ||
 | A. Pümpel GmbH & Co. KG. A-6800 Feldkirch Austria |
 | August Rädler GmbH A-6922 Wolfurt Austria |
| Listed since: | Dec 29, 2015 | ||
| Amended: | Sept 30, 2019 | ||
| baubook product index: | 2038 by | ||
|
