Manufacturer
 | Forbo Eurocol Deutschland GmbH A-8402 Werndorf Austria |
| Product groups: | Adhesives for elastic floor coverings, Adhesives for textile floor coverings | ||
| Product photos: | 
| ||
| Materials used: | Acrylat / Styrol-Copolymerdispersionen, Verdickungs-, Netz-, Entschäumungsmittel, mineralische Füllstoffe, Wasser | ||
| Renewable raw materials: | 0 | w% | |
| Mineral raw materials: | 24 | w% | |
| Fossil raw materials: | 74 | w% | |
| Reference value: | Low-solvent (<5%) dispersion adhesive | ||
 |
The criteria is relevant and the product supports the fulfillment of the criterion. |
| ρ density: | 1100 | kg/m³ | |
| c specific heat capacity: | not specified | J/(kg·K) |
| pH value: | ranging from 7 up to 8 |
| Chair caster suitability: | yes | ||
| Suitable for underfloor heating: | yes | ||
| Conductive: | no | ||
| Installation (description): | not specified | ||
| Wet life from: | 0 | min | |
| Wet life until: | 20 | min | |
| Walk on time (… hours): | 0,5 | h | |
| Adhesive type: |
| ||
| Processing temperature, at least: | 18 | °C | |
| Consumption per procedure (kg/m²): | 0,3 | kg/m² | |
| Number of procedures required: | 1 | ||
| A1-A3 Product stage EI disposal indicator |
reference | Unit |
| Core environmental impact indicators | ||
| GWP-fossil Global warming potential - fossil | 1,29 | kg CO2 Äq./kg |
| GWP-biogenic Global warming potential - biogenic | 0,00 | kg CO2 Äq./kg |
| GWP-total Global warming potential - total | 1,29 | kg CO2 Äq./kg |
| ODP Depletion potential of the stratospheric ozone layer | 1,63·10-7 | kg CFC-11 eq./kg |
| AP Acidification potential | 0,00528 | kg SO2 Äq./kg |
| EP Eutrophication potential | 0,00248 | kg PO43- eq./kg |
| POCP Photochemical Ozone Creation Potential | 0,000837 | kg C2H4 eq./kg |
| Indicators describing resource use | ||
| PERE Primary energy renewable - energy resources | 0,741 | MJ/kg |
| PERM Primary energy renewable - material | 0,00 | MJ/kg |
| PERT Primary energy renewable - total | 0,741 | MJ/kg |
| PENRE Primary energy non-renewable - energy resources | 24,2 | MJ/kg |
| PENRM Primary energy non-renewable - material | 7,68 | MJ/kg |
| PENRT Primary energy non-renewable - total | 31,8 | MJ/kg |
| SVHC (Substances of Very High Concern): | Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste | ||
| VOC (g/l): | 0 | g/l | |
| VOC explanation: | Actual value | ||
| Halogen-organic compounds: | 0 | w% | |
| CE marking: | not specified | ||
| Water pollution class: | 1 | ||
| GISCODE for floor-laying materials: | D1 Solvent-free dispersion floor-laying materials | ||
| Technical data sheet: | TI_Eurocol_611_Lino_Plus_DE.pdf (1,08 MB) issued on Aug 26, 2022 | ||
| Safety data sheet: | issued on Feb 19, 2023 | ||
| General Technical Approval (Germany): | PZ_611_abZ_Z_155_20_208_2023_DE.pdf (626 KB) valid until July 4, 2028 Registration number: Z-155.20-207 | ||
| Sustainability data sheet: | PZ_611_Lino_Plus_Nachhaltigkeit_DE.pdf (1,61 MB) issued on July 26, 2021 | ||
| Other forms of proof: | Lino-System-Solution-Emissionsverhalten ÖTI (344 KB) Brandverhalten mit Artoleum auf Korkment (374 KB) Brandverhalten mit Marmoleum auf Korkment (414 KB) | ||
| Listed since: | Feb 27, 2017 | ||
| Amended: | Aug 9, 2023 | ||
| baubook product index: | 9149 bw | ||
|
