KI Zwischensparren-Dämmrolle UNIFIT 037

Knauf Insulation GmbH
A-9586 Fürnitz
Product groups: Glass wool insulation boards
Area of application (insulating materials):
Aufzählungspunkt Between supporting structure
Product photos:
Reference value: Glass wool MW(GW)-W (24 kg/m³)
Criteria for certification, tendering and subsidies
2. 1. 4. Limit for plastic content in insulating materials and foils made of paper
2. 2. 2. Limits for CMR substances in insulation materials
2. 2. 12. Ban of acutely toxic substances
2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
5. 1. 6. Limits for VOC and SVOC emissions from insulating materials
5. 3. 1. Avoiding inorganic fibres in indoor air
6. 1. 2. Products without metal composites
A: Insulation materials with indoor air relevance
Room-side laid insulation materials that are not closed by a flow-tight layer of the room ai
B: Insulation materials without indoor air relevance
Insulating materials that are not laid on the room side and insulating materials laid on the room side, which are sealed off from the room air by a flow-tight layer.

The criteria is relevant and the product supports the fulfillment of the criterion.
The criteria is relevant and the product does not support the fulfillment of the criterion or there are no validation documents available.
The criterion is relevant, but it must be demonstrated on a case-by-case basis for the products supplied in the respective construction project.
The criteria is not relevant for the application.
if an application is displayed in green, all relevant criteria of this application are met.
If at least one of the relevant criteria for an application is not met, the application is displayed in red.
Technical characteristics
Types of application according to ÖNORM B 6000 (MW): MW-WL Bound mineral wool (lighter than MW-W), not compression-resistant, for heat insulation of walls, ceilings or roofs)

thickness: 10 cm
12 cm
14 cm
16 cm
18 cm
20 cm
22 cm
24 cm
Physical parameters
actual val.ref.
λr thermal conductivity rated valueAUT: 0,037 0,036 W/(m·K)
ρ density: not specified 24 kg/m³
c specific heat capacity: 1030 1030 J/(kg·K)
μ Vapour diffusion resistance factor: 1 not specified
Processing properties
Installation (description): not specified
Ecological characteristics
Ecological parameters
A1-A3 Product stageactual val.ref.
PERE Primary energy renewable, energy resources not specified 2,55 MJ/kg
PERM Primary energy renewable, material not specified 0,00 MJ/kg
PERT Primary energy renewable, total not specified 2,55 MJ/kg
PENRE Primary energy non-renewable, energy resources not specified 46,2 MJ/kg
PENRM Primary energy non-renewable, material not specified 0,00 MJ/kg
PENRT Primary energy non-renewable, total not specified 46,2 MJ/kg
GWP100-fossil Global warming potential, fossil not specified 2,45 kg CO2 eq./kg
GWP100-biogenic Global warming potential, biogenic not specified 0,00 kg CO2 eq./kg
GWP100-total Global warming potential, total not specified 2,45 kg CO2 eq./kg
AP Acidification potential not specified 0,0153 kg SO2 eq./kg
EP Eutrophication potential not specified 0,00686 kg PO43-/kg
POCP Photochemical ozone creation not specified 0,000652 kg C2H4/kg
ODP Ozone depletion potential not specified 2,61·10-7 kg CFC-11/kg
Halogen-organic compounds: not specified w%
Production of raw materials
Service area
CE marking
CE marking: yes
CE Certificate of conformity:
issued by: MPA BAU Hannover
CE Declaration of Performance:
issued on Dec 12, 2014
August Rädler GmbH
A-6922 Wolfurt
A-6850 Dornbirn
Tischler Rohstoff e.Gen.
A-6845 Hohenems
Tschabrun Hermann GmbH
A-6830 Rankweil
baubook declaration
Listed since: June 16, 2016
baubook product index: 1994 fv
baubook green procurement
Harmonised “EcoBuildingCriteria” provided by “ÖkoKauf Wien” and “service package sustainable construction in Vorarlberg”
link to this page: