 | Pittsburgh Corning Ges.m.b.H. A-4020 Linz Austria |
| Product groups: | Bitumen pre-coatings, primers | ||
| Materials used: | lösungsmittelfreie Bitumenemulsion | ||
| Renewable raw materials: | 0 | w% | |
| Mineral raw materials: | 0 | w% | |
| Reference value: | Bitumen coating | ||
 |
The criteria is relevant and the product supports the fulfillment of the criterion. |
| λ thermal conductivity: | 0,23 | W/(m·K) | Richtwert |
| ρ density: | 1050 | kg/m³ | Richtwert |
| c specific heat capacity: | not specified | J/(kg·K) |
| pH value: | 10 |
| Resistant against: | Water | ||
| Installation (description): | not specified | ||
| Processing temperature, at least: | 5 | °C | |
| Consumption per procedure (l/m²): | 0,3 | l/m² | |
| Consumption per procedure (kg/m²): | 0,3 | kg/m² | |
| Number of procedures required: | 1 | ||
| Drying time: | ranging from 3 up to 12 | hour(s) | |
| Component A: | Bitumenemulsion | ||
| Mixing ratio: | Als Voranstrich bei Verwendung von Heißbitumen als Kleber: Material 1:3 Raumteile mit Wasser verdünnen (1 Raumteil PC® EM, 3 Raumteile Wasser). Als Voranstrich bei Verwendung von Bitumen-Kaltkleber PC® 56 und PC® 58 : Material 1:10 Raumteile mit Wasser verdünnen (1 Raumteil PC® EM, 10 Raumteile Wasser). | ||
| A1-A3 Product stage EI disposal indicator |
reference | Unit |
| Core environmental impact indicators | ||
| GWP-fossil Global warming potential - fossil | 1,07 | kg CO2 Äq./kg |
| GWP-biogenic Global warming potential - biogenic | 0,00 | kg CO2 Äq./kg |
| GWP-total Global warming potential - total | 1,07 | kg CO2 Äq./kg |
| ODP Depletion potential of the stratospheric ozone layer | 1,77·10-7 | kg CFC-11 eq./kg |
| AP Acidification potential | 0,00441 | kg SO2 Äq./kg |
| EP Eutrophication potential | 0,000513 | kg PO43- eq./kg |
| POCP Photochemical Ozone Creation Potential | 0,383 | kg C2H4 eq./kg |
| Indicators describing resource use | ||
| PERE Primary energy renewable - energy resources | 0,121 | MJ/kg |
| PERM Primary energy renewable - material | 0,00 | MJ/kg |
| PERT Primary energy renewable - total | 0,121 | MJ/kg |
| PENRE Primary energy non-renewable - energy resources | 12,8 | MJ/kg |
| PENRM Primary energy non-renewable - material | 42,6 | MJ/kg |
| PENRT Primary energy non-renewable - total | 55,4 | MJ/kg |
| SVHC (Substances of Very High Concern): | Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste mit mehr als 0,1 Gew.-% pro Einzelstoff. | ||
| VOC (g/l): | 0 | g/l | |
| VOC explanation: | Actual value | ||
| Halogen-organic compounds: | 0 | w% | |
| CE marking: | not specified | ||
| Water pollution class: | 1 | ||
| GISCODE - Cold-process. bitumen product for sealing: | BBP10 Bituminous emulsions | ||
| Technical data sheet: | PDS_PC_EM_de.pdf (131 KB) issued on Feb 7, 2017 | ||
| Safety data sheet: | SDS_PC_EM_de.PDF (131 KB) issued on Oct 29, 2020 | ||
 | A. Pümpel GmbH & Co. KG. A-6800 Feldkirch Austria |
| Listed since: | Dec 10, 2019 | ||
| Amended: | Sept 7, 2023 | ||
| baubook product index: | 9461 ad | ||
|
Manufacturer 