AUSTROTHERM XPS Premium P

List of Criteria 2020

application		criteria
A	B
		2. 2. 2. Limits for CMR substances in insulation materials
		2. 2. 3. Ban of substances with greenhouse effects
		2. 2. 12. Ban of acutely toxic substances
		2. 4. 2. Limits for organohalogen compounds
		2. 4. 6. Limit for volatile organohalogen compounds in insulation materials
		2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
		2. 7. 1. Ban of critical flame retardants
		5. 1. 6. Limits for VOC and SVOC emissions from insulating materials

A: Insulation materials with indoor air relevance
Insulation materials installed on the room side of the airtightness layer of the building.

B: Insulation materials without indoor air relevance
Insulation materials that are not installed on the room side of the building's airtightness layer.

	The criteria is relevant and the product supports the fulfillment of the criterion.
	The criteria is relevant and the product does not support the fulfillment of the criterion or there are no validation documents available.
	The criteria is not relevant for the application.

	if an application is displayed in green, all relevant criteria of this application are met.
	If at least one of the relevant criteria for an application is not met, the application is displayed in red.

Types of application according to ÖNORM B 6000 (XPS):

XPS-R Panel with rough surface, compression-resistant, with effective plaster and adhesion qualities, for heat insulation of heat-bridges, ventilated roofs and ceilings. This type of product also includes panels, where the entire surface is rough or embossed following mechanical and/or thermal treatment.

Dimensions

Format l x w:	1.250 mm x 600 mm
thickness:	8 cm 10 cm 12 cm 14 cm 16 cm 18 cm 20 cm 22 cm 24 cm 26 cm 28 cm 30 cm 32 cm 34 cm 36 cm 38 cm 40 cm

Physical parameters

λ_r thermal conductivity rated value_AUT:	0,027	W/(m·K)
ρ density:	not specified	kg/m³
c specific heat capacity:	not specified	J/(kg·K)
E_dyn Dynamic elasticity modulus:	12000	MN/m²

Serviceability

Flammability class:

Ingredients

SVHC (Substances of Very High Concern):	Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste
Insulation materials free from climate-damaging substances:	The insulation material used does not contain any (H)PFCs or (H)CFCs with a GWP > 1
Halogen-organic compounds:	not specified	w%

Production of raw materials

Country of origin of raw materials (text):

not specified

Product groups:	XPS insulation boards
Area of application (insulating materials):	Wall External insulation Perimeter insulation

CE marking:	yes
CE Declaration of Performance:	Leistungserklaerung_XPS_Premium_P_AT.pdf (143 KB) issued on Jan 7, 2019

Listed since:	June 25, 2019
Amended:	Jan 12, 2023
baubook product index:	3332 bf