GLUKON prime

List of Criteria 2020

Adhesion primers (external)

application		criteria
A	B
		2. 2. 1. Limits for CMR substances
		2. 2. 4. Limits for substances hazardous to the aquatic environment
		2. 2. 5. Ban of alkylphenol ethoxylates (APEO)
		2. 2. 11. Ban of SVHC
		2. 2. 12. Ban of acutely toxic substances
		2. 2. 16. Ban of volatile aromatic hydrocarbons
		2. 3. 3. Limits for heavy metals
		2. 4. 4. Limit for organohalogen compounds in coatings
		2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
		2. 5. 11. VOC and SVOC limits for other building products
		2. 6. 4. Ban of biocide use in facade plasters and paints
		3. 2. 2. Additional criterion: Products made of natural materials

A: eco class A
The use of biocides is not required in outdoor use.

B: eco class B
In exceptional cases, the use of biocides is indispensable. This must be explicitly requested in the call for tenders. Only encapsulated biocides may be used.

Adhesion primers (internal)

	2. 2. 1. Limits for CMR substances
	2. 2. 4. Limits for substances hazardous to the aquatic environment
	2. 2. 5. Ban of alkylphenol ethoxylates (APEO)
	2. 2. 11. Ban of SVHC
	2. 2. 12. Ban of acutely toxic substances
	2. 3. 3. Limits for heavy metals
	2. 4. 4. Limit for organohalogen compounds in coatings
	2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
	2. 5. 1. VOC and SVOC limits for interior wall paints
	2. 6. 1. Limits for biocides
	2. 6. 2. Limit for free formaldehyde
	3. 2. 2. Additional criterion: Products made of natural materials

Adhesives for insulation boards

	2. 2. 1. Limits for CMR substances
	2. 2. 4. Limits for substances hazardous to the aquatic environment
	2. 2. 8. Limits for aromatic hydrocarbons
	2. 2. 11. Ban of SVHC
	2. 2. 12. Ban of acutely toxic substances
	2. 4. 3. Limit for organohalogen compounds in flooring and adhesive work
	2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
	2. 5. 11. VOC and SVOC limits for other building products

Adhesives for wall panels; Other adhesives

	2. 2. 1. Limits for CMR substances
	2. 2. 4. Limits for substances hazardous to the aquatic environment
	2. 2. 8. Limits for aromatic hydrocarbons
	2. 2. 11. Ban of SVHC
	2. 2. 12. Ban of acutely toxic substances
	2. 4. 3. Limit for organohalogen compounds in flooring and adhesive work
	2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
	2. 5. 11. VOC and SVOC limits for other building products
	2. 6. 1. Limits for biocides
	2. 6. 2. Limit for free formaldehyde

	The criteria is relevant and the product supports the fulfillment of the criterion.
	The criteria is relevant and the product does not support the fulfillment of the criterion or there are no validation documents available.
	The criteria is not relevant for the application.

	if an application is displayed in green, all relevant criteria of this application are met.
	If at least one of the relevant criteria for an application is not met, the application is displayed in red.

Installation (description):	not specified
Wet life from:	1	min
Wet life until:	12	min
Walk on time (… hours):	0	h
Adhesive type:	Single-sided adhesive Contact adhesive Solvent adhesive
Order type:	Inject
Processing temperature, at least:	5	°C
Can be overpainted after:	1	hour(s)
Consumption per procedure (kg/m²):	0,1	kg/m²
Number of procedures required:	2
Drying time:	ranging from 24 up to 36	hour(s)

Ingredients

SVHC (Substances of Very High Concern):	Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste
VOC (g/l):	553	g/l
Softener:	not specified
Halogen-organic compounds:	not specified	w%

Production of raw materials

Country of origin of raw materials (text):

not specified

CE marking

CE marking:

not specified

GHS hazard statement, warnings, hazard classes

Water pollution class:	2
H phrases:	H222, H224, H225, H226, H227, H228, H229, H336, H411, H223
P phrases:	P101, P102, P103, P210, P211, P251, P304, P340, P410, P412, P501

Download

Technical data sheet:	TMB_GLUKON_prime_09_2018.pdf (1,44 MB) issued on Sept 1, 2018
Safety data sheet:	sdb___GLUKON_prime_Druckbehaelter_AT.pdf (407 KB) issued on June 25, 2019 sdb___GLUKON_prime_Dose_AT.pdf (407 KB) issued on June 26, 2019

Product groups:	Adhesion primers (external), Adhesion primers (internal), Adhesives for insulation boards, Adhesives for wall panels, Other adhesives
Product photos:
Renewable raw materials:	0	w%
Renewable raw materials:	0	w%

ρ density:	not specified	kg/m³
c specific heat capacity:	not specified	J/(kg·K)

Listed since:	July 17, 2019
baubook product index:	10403 aa