JACKODUR EVO
link to this page:
https://www.baubook.at/m/PHP/Info.php?SI=2142738299&SW=16&lng=2

Manufacturer
JACKON Insulation GmbH
D-39619 Arendsee
Germany
 
Description
Product groups: XPS insulation boards
Area of application (insulating materials):
Aufzählungspunkt Perimeter insulation
Aufzählungspunkt Base insulation
Aufzählungspunkt Double-wall construction
Aufzählungspunkt Under board panelling
Aufzählungspunkt Under plaster
Aufzählungspunkt On supporting structure (from outside)
Aufzählungspunkt Inverted roof
Aufzählungspunkt Underneath the base plate
Aufzählungspunkt Underneath the cellar ceiling
Aufzählungspunkt Top SC, accessible
Product photos:
Materials used: Polystyrolschaum mit Nukleierungs- und Farbmittel, als Flammschutzmittel wird polymeres bromhaltiges Flammschutzmittel verwendet, Treibmittel besteht aus Kohlendioxid, Dimethylether und Isobutan
Renewable raw materials: 0w%
Mineral raw materials: 0w%
Fossil raw materials: 100w%
Recycling materials: 0w%
Bitumen: 0w%
Reference value: XPS–G 30 > 180 mm (32 kg/m³)
 
Criteria for certification, tendering and subsidies
List of Criteria 2020
applicationcriteria
AB
2. 2. 2. Limits for CMR substances in insulation materials
2. 2. 3. Ban of substances with greenhouse effects
2. 2. 12. Ban of acutely toxic substances
2. 4. 2. Limits for organohalogen compounds
2. 4. 6. Limit for volatile organohalogen compounds in insulation materials
2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances
2. 7. 1. Ban of critical flame retardants
5. 1. 6. Limits for VOC and SVOC emissions from insulating materials
A: Insulation materials with indoor air relevance
Insulation materials installed on the room side of the airtightness layer of the building.
B: Insulation materials without indoor air relevance
Insulation materials that are not installed on the room side of the building's airtightness layer.

The criteria is relevant and the product supports the fulfillment of the criterion.
The criteria is relevant and the product does not support the fulfillment of the criterion or there are no validation documents available.
The criteria is not relevant for the application.
if an application is displayed in green, all relevant criteria of this application are met.
If at least one of the relevant criteria for an application is not met, the application is displayed in red.
 
Technical characteristics
Types of application according to ÖNORM B 6000 (XPS): XPS-G 30 Compressive strength >= 300 kPa panel with flat surface, resistant to humidity, for heat insulation of walls, ceilings and roofs; also for constructions with enhanced and high pressure resilience (e.g. parking levels for lorries, fire engines) and perimeter insulation

Dimensions
Format l x w: 1.250 mm x 600 mm
thickness: 4 cm
5 cm
6 cm
8 cm
10 cm
12 cm
14 cm
16 cm
18 cm
20 cm
22 cm
24 cm
26 cm
28 cm
30 cm
32 cm
34 cm
36 cm
38 cm
40 cm
 
Physical parameters
Serviceability
Flammability class:
E
Smoke emission:
s2 = Limited smoke emission
Flaming droplets:
d0 = No falling / dripping
 
Processing properties
Installation (description): not specified
 
Life Cycle Assessment (LCA)
Background database Ecoinvent A1
A1-A3 Product stage
EI disposal indicator
reference Unit
Core environmental impact indicators
GWP-fossil Global warming potential - fossil 4,24 kg CO2 Äq./kg
GWP-biogenic Global warming potential - biogenic 0,00 kg CO2 Äq./kg
GWP-total Global warming potential - total 4,24 kg CO2 Äq./kg
ODP Depletion potential of the stratospheric ozone layer 6,13·10-8 kg CFC-11 eq./kg
AP Acidification potential 0,0155 kg SO2 Äq./kg
EP Eutrophication potential 0,00257 kg PO43- eq./kg
POCP Photochemical Ozone Creation Potential 0,00816 kg C2H4 eq./kg
Indicators describing resource use
PERE Primary energy renewable - energy resources 0,879 MJ/kg
PERM Primary energy renewable - material 0,00 MJ/kg
PERT Primary energy renewable - total 0,879 MJ/kg
PENRE Primary energy non-renewable - energy resources 53,6 MJ/kg
PENRM Primary energy non-renewable - material 40,0 MJ/kg
PENRT Primary energy non-renewable - total 93,6 MJ/kg
Quelle: IBO benchmarks 2020, ab 17.2.2023
 
 
Ecological characteristics
Ingredients
SVHC (Substances of Very High Concern): Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste
Insulation materials free from climate-damaging substances:
The insulation material used does not contain any (H)PFCs or (H)CFCs with a GWP > 1
Halogen-organic compounds: 1w%
 
Production of raw materials
 
Service area
CE marking
CE marking: yes
CE Declaration of Performance:
issued on Sept 15, 2022
 
Ecolabels
Austrian Ecolabel
PDF (225 KB)
valid until June 2027
 
Download
Technical data sheet:
issued on Aug 4, 2023
Safety data sheet:
issued on Nov 14, 2022
Test certificate in accordance with EN ISO 16000:
available
issued on Oct 12, 2022
issued by: TÜV Rheinland
Sustainability data sheet:
issued on June 21, 2023
 
baubook declaration
Listed since: Aug 22, 2023
baubook product index: 6945 ae
 
baubook green procurement
Harmonised “EcoBuildingCriteria” provided by “ÖkoKauf Wien” and “service package sustainable construction in Vorarlberg”