back

ISOLENA Schafwolle, Klemmfilz, 30 kg/m³

Manufacturer ISOLENA Naturfaservliese GmbH
Product group(s) Sheep's wool insulation
Product images
Description of area of application Thermal insulation: Internal wall, Partition wall insulation, Installation level, Partition wall lining, Room air renovation

Sound insulation: Ceiling insulation, suspended ceiling, Sound proof ceiling, Acoustic ceiling
Manufacturer's product description Sheep's wool insulation ISOLENA Klemmfilz 30kg/m³ with biocide-free wool protection Ionic Protect® made from 100% pure sheep's wool without synthetic additives or supporting fibres. The insulating material is renewable, durable, reusable and fully recyclable.
Processing Installation: Install insulation rolls tightly butted together from bottom to top. Sufficient and slip-proof fastening.
Quick installation, ideally suited for working overhead. No dust mask and no protective clothing necessary.
The rolls can be cut to length by tearing by hand or with the ISOLENA cutting device.
How it works! https://www.isolena.com/en/know-how/sheepwool-insulation-installation-videos.html
Origin of the main ingredients Europe
Details Show detailed information from baubook
Eco-labels, quality seals, labels natureplus natureplus
Platforms Vorarlberg WBF klimaaktiv Kriterien Niederösterreich WBF ÖkoBauKriterien natureplus BNB/QNG-Produktinfo wohngsund
Product Index 2002 ac
Dimensions
Format l x w 9,000 mm x 600 mm
6,000 mm x 600 mm
4,000 mm x 600 mm
Thickness 3, 4, 5, 6, 8 cm
Dimensions (description) Standard dimensions are available in width of 600mm and lengths of 4000-9000mm. Special dimensions upon request.
Manufacturer warranty The manufacturer offers a product assurance on the quality and functionality of the insulation products made from 100% sheep's wool. This guarantee covers the material durability and the insulation properties under normal conditions of use in accordance with the applicable technical regulations. Damage caused by improper use is excluded.
Building physics values
λr thermal conductivity rated valueAUT
Austrian rated heat conductivity value. This value is to be used for thermal performance calculations (energy performance certificates, etc.).

Definition for insulating materials: A value that is not exceeded by at least 90% of production (probability of acceptance 90%), valid for an average temperature of 10°C and the state of equilibrium for humidity at 23°C/80% relative atmospheric humidity.
Source: ÖNORM B 6015-2

Proof:
- Nominal value from the CE Declaration of Performance with corresponding humidity conversion factors
- Nominal value from the European Technical Approval with corresponding humidity conversion factors
- test certificate for the rated value in accordance with ÖNORM 6015-5
 0.036 W/(m·K)
μ Vapour diffusion resistance factor
The water vapour diffusion resistance (μ value) is a parameter to determine the exchange of moisture of a construction material. The lower the μ value, the easier it is for vapour to penetrate a substance.

Definition: Ratio of the vapour diffusion coefficients of the air and that of the relevant substance.

Proof: Manufacturer information
 1
μ (dry) Vapour diffusion resistance value
Water vapour diffusion resistance value for conditions assuming a dry state.

The diffusion resistance (μ value) is a parameter to determine the exchange of moisture of a construction material. The lower the μ value, the easier it is for vapour to penetrate a substance.

Definition: Ratio of the vapour diffusion coefficients of the air and that of the relevant substance.

Proof: Manufacturer information
 1
μ (humid) Vapour diffusion resistance value
Water vapour diffusion resistance value for conditions assuming a humid state.

The diffusion resistance (μ value) is a parameter to determine the exchange of moisture of a construction material. The lower the μ value, the easier it is for vapour to penetrate a substance.

Definition: Ratio of the vapour diffusion coefficients of the air and that of the relevant substance.

Proof: Manufacturer information
 1
ρ density
Density (ρ)

For solid materials, the nominal density is specified.

For bulk materials consisting of granular solids, the bulk density is specified.

For vegetation substrates, the bulk density in the dry state is specified.


Proof: Manufacturer information
 30 kg/m³
ρ density
Density (ρ)

For solid materials, the nominal density is specified.

For bulk materials consisting of granular solids, the bulk density is specified.

For vegetation substrates, the bulk density in the dry state is specified.


Proof: Manufacturer information
 30 kg/m³
ρ density
Density (ρ)

For solid materials, the nominal density is specified.

For bulk materials consisting of granular solids, the bulk density is specified.

For vegetation substrates, the bulk density in the dry state is specified.


Proof: Manufacturer information
 30 kg/m³
c specific heat capacity
The specific heat capacity (c) denotes the capacity of a body to store energy in the form of heat.

Definition: Volume of heat, which must be conveyed to a body with a mass of 1 kg, to generate heating of 1 degree Kelvin.

Proof: Manufacturer information
 1760 J/(kg·K)
Usability
Combustibility class D
Smoke development s2
Flaming droplets d0
CE marking yes
Retailer
Timeline
Mar 05, 2025 Last update / change with baubook quality assurance
Apr 18, 2005 First declaration

Content-basierte Änderungshistorie aus dem täglichen Feed-Sync (PostgreSQL), inkl. Änderungen verknüpfter Objekte (Richtwerte, verknüpfte Produkte, Legenden — violette Einträge). Nur echte Datenänderungen — reine letzte_Aenderung-Bumps erscheinen nicht.

Lade Timeline …
@baubook GmbH   Alserbachstrasse 5/8, 1090 Wien, Austria   T +43 1 319 200 50   office@baubook.info   www.baubook.info