CARLISLE® Construction Materials GmbH D-21079 Hamburg Germany |
Product groups: | Plastic and rubber sealing membranes | ||
Product photos: | |||
Materials used: | EPDM Synthesekautschuk mit Füllstoff, Ruß und Vernetzungssystem, Unterseite Bitumen mit SBS Synthesekautschuk | ||
Renewable raw materials: | 0 | w% | |
Mineral raw materials: | 10 | w% | |
Fossil raw materials: | 60 | w% | |
Recycling materials: | 0 | w% | |
Bitumen: | 30 | w% | |
Reference value: | Rubber, EPDM |
2. 4. 1. Ban of PVC | |
2. 4. 2. Limits for organohalogen compounds | |
2. 4. 7. Additional criterion: Complete exclusion of organohalogen substances | |
2. 7. 1. Ban of critical flame retardants |
The criteria is relevant and the product supports the fulfillment of the criterion. |
thickness: | 0,25 cm 0,31 cm | ||
Dimensions (description): | Rollen 10x1m, zusätzlich Anschlußstreifen in 25, 33, 50, 66 cm Breite |
λ thermal conductivity: | 0,17 | W/(m·K) | |
ρ density: | 1220 | kg/m³ | |
Surface weight: | 3,5 | kg/m² | |
c specific heat capacity: | 1000 | J/(kg·K) | Richtwert |
μ Vapour diffusion resistance factor: | 58000 | ||
sd: | 180 | m | |
sd (min) lower limit of the diffusion-equivalent air-layer thickness: | 145 | m |
Flammability class: | E | ||
Flaming droplets: | d1 = Limited dripping | ||
Longitudinal tensile strength: | 1,02 | N/mm² | |
Transverse tensile strength: | 1 | N/mm² |
Installation (description): | not specified | ||
Laying: |
|
A1-A3 Product stage EI disposal indicator |
reference | Unit |
Core environmental impact indicators | ||
GWP-fossil Global warming potential - fossil | 2,65 | kg CO2 Äq./kg |
GWP-biogenic Global warming potential - biogenic | -0,0460 | kg CO2 Äq./kg |
GWP-total Global warming potential - total | 2,60 | kg CO2 Äq./kg |
ODP Depletion potential of the stratospheric ozone layer | 6,42·10-7 | kg CFC-11 eq./kg |
AP Acidification potential | 0,0107 | kg SO2 Äq./kg |
EP Eutrophication potential | 0,00370 | kg PO43- eq./kg |
POCP Photochemical Ozone Creation Potential | 0,00221 | kg C2H4 eq./kg |
Indicators describing resource use | ||
PERE Primary energy renewable - energy resources | 1,89 | MJ/kg |
PERM Primary energy renewable - material | 0,00 | MJ/kg |
PERT Primary energy renewable - total | 1,89 | MJ/kg |
PENRE Primary energy non-renewable - energy resources | 47,9 | MJ/kg |
PENRM Primary energy non-renewable - material | 35,9 | MJ/kg |
PENRT Primary energy non-renewable - total | 83,8 | MJ/kg |
Environmental Product Declaration (EPD) - other: |
|
SVHC (Substances of Very High Concern): | Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste mit mehr als 0,1 Gew.-% pro Einzelstoff. | ||
PVC-free product: | yes | ||
Softener: | Softener-free | ||
Halogen-organic compounds: | 0 | w% |
Country of origin of raw materials (text): | not specified |
CE marking: | yes | ||
CE Declaration of Performance: | issued on May 24, 2013 |
Technical data sheet: |
| ||
Other forms of proof: | Green Label (635 KB) | ||
Documents: |
Unterlaufsicherheit RESITRIX SK W (2,48 MB)
RESITRIX SK W - WU-Beton Übergang (578 KB)
RESIFLEX Dehnfugenband (1.006 KB)
|
DAPEK Dach- und Abdichtungstechnik GmbH A-4481 Asten Austria |
Listed since: | May 2, 2006 | ||
Amended: | May 9, 2023 | ||
baubook product index: | 3299 aa |
|