| Dörken Coatings GmbH & Co. KG D-58313 Herdecke Germany |
| Product groups: | Dispersion paints (internal) | ||
| Product photos: | 
| ||
| Materials used: | Acrylatcopolymer, Titandioxid, Calciumaluminiumsulfathydrat, Siliciumdioxid, gemahlenes natürliches Calciumcarbonat, Aluminiumsilikat, Wasser, Natriumhydroxid, Additive: Antischaummittel auf Kohlenwasserstoffbasis, Hydroxyethylcellulose (keine Gefahrstoffe nach CLP) | ||
| Renewable raw materials: | 0 | w% | |
| Mineral raw materials: | 20 | w% | |
| Fossil raw materials: | 9 | w% | |
| Renewable raw materials: | 36 | w% | |
 |
The criteria is relevant and the product supports the fulfillment of the criterion. |
 |
The criteria is relevant and the product does not support the fulfillment of the criterion or there are no validation documents available. |
| thickness: | minimum: 0,005 cm maximum: 0,015 cm | ||
| ρ density: | not specified | kg/m³ | |
| c specific heat capacity: | not specified | J/(kg·K) |
| pH value: | ranging from 11 up to 11,4 |
| Gloss type: | Matt | ||
| Wet scrub resistance (according to EN 13300): | Class 2 | ||
| Covering power (according to EN 13300 Sect. 5.5): | Class 1 | ||
| Installation (description): | not specified | ||
| Order type: |
| ||
| Processing temperature, at least: | 8 | °C | |
| Can be overpainted after: | 4 | hour(s) | |
| Consumption per procedure (l/m²): | 150 | l/m² | |
| Consumption per procedure (kg/m²): | 0,2 | kg/m² | |
| Number of procedures required: | 2 | ||
| Drying time: | ranging from 48 up to 72 | hour(s) | |
| Environmental Product Declaration (EPD) - other: | valid until July 10, 2024 | ||
| SVHC (Substances of Very High Concern): | Das verkaufsfertige Endprodukt enthält keinen besonders besorgniserregenden Stoff (SVHC) der Kandidatenliste | ||
| VOC (g/l): | 1 | g/l | |
| VOC explanation: | Maximum value | ||
| Softener: | Softener-free | ||
| Halogen-organic compounds: | 0 | w% | |
| Country of origin of raw materials (text): | not specified | ||
| CE marking: | not specified | ||
| Water pollution class: | 1 | ||
| H phrases: | H- | ||
| GISBAU Product code for Concrete after-treatment: | BSW10 Coating materials, water-based, low-conservative | ||
| GISBAU Product code for paints and varnishes: | M-DF01 Dispersion paints, solvent-free | ||
| Technical data sheet: | tm_lucite_multiresist_pro_de.pdf (950 KB) issued on July 1, 2021 | ||
| Safety data sheet: | SDB_07_071251852001_DE_DE.pdf (120 KB) issued on June 1, 2021 | ||
| Sustainability data sheet: | issued on Feb 3, 2021 | ||
| Other forms of proof: | ISEGA Schimmelresistenz MultiResist PRO (246 KB) Hohenstein Virenresistenz MultiResist Pro (160 KB) Dr. Wilkens Desinfektionsbeständigkeit MultiResist (704 KB) ISEGA Indirekter Kontakt Lebensmittel MultiResist (630 KB) ISEGA Bakterienresitenz MultiResist Pro (239 KB) MultiResistPro.pdf (1,18 MB) | ||
 | Sefra Farben-und Tapetenvertrieb GmbH A-1050 Wien Austria |
| Listed since: | Oct 15, 2020 | ||
| Amended: | Feb 15, 2022 | ||
| baubook product index: | 1495 ca | ||
|
Manufacturer 